Atlantik V2 just how to connect with the Wi Fi Router or Control one or more light without router;

10
Feb

Atlantik V2 just how to connect with the Wi Fi Router or Control one or more light without router;

Atlantik V2 Simple tips to hook up to the Wi Fi Router or Control multiple light without router;

in order to connect the Atlantik V2.X to your property Wi Fi router you need to proceed with the 11 actions.

1. Switch off all units.

2. Switch on just the unit that is first will link.

3. In your tablet pick the wifi-socket.

4. Start Chrome from your own tablet and kind 192.168.1.100 within the target club.

5. Username admin password 000000

6. Change mode to Sat.

7. Place your community SSID and password. ( Encryption constantly Disable : ( the system believe it is automaticly )

9. Head to system when you look at the menu that is main and then click restart.

10. Go to wifi establishing once again and alter to your system router SSID.

11. get the Orphek application and do search id, it will get the very first device.

Then do from 1 to 11 when it comes to units that are remaining.

7. SSID : place your Router Wi-Fi Network Name ( SSID Name ).

Into the SSID field you shall key in your system title. This really is situation painful and sensitive therefore make sure to make use of money or letters that are small it really is proper. When you look at the encryption key box: key in your Wi-Fi network password if have actually . ( Encryption constantly Disable : ( the system believe it is automaticly )

Select /Keep ,disable within the encryption field (don’t confuse with encryption key field). Your tablet will find the encryption automatically key in the event your router supports it.

9. When you look at the left that is upper of UART display you will definitely a range of fundamental, Advanced, and System.

Select system TAB plus in the very first element of this web web page you will notice a restart key. Press the restart key. a screen appear saying the web web browser cannot connect with the internet protocol address. It is fine as you should have to hook up to your router SSID.

10. In your tablet /Phone hook up to your Router network that is wi-fi SSID.

11.Open the Orphek software and then click the clear switch regarding the top right regarding the display. Now click on the search key on the top left associated with display. Your community should get the tablet along with your new ip for your Orphek light should appear.

Perform actions 1 to 11 for the staying Orphek devices.

* choice : you are able to set the internet protocol address fixed , for better connection

You shall then check out:

A. Unchecked The Enable DHCP

B. Enter a static internet protocol address that belongs to your residence router. As an example:

Then it is possible to enter 100.168.20.2 or any IP between .2 and .254 Should your router is 100.168.20.1.

the ip needs to be unique or even it’ll cause an internet protocol address conflict

C. It’s also wise to enter the submask as well as in many cases it really is 255.255.255.0.

D. Go into the Gateway Address : it ought to be your Router IP

E. Then perform some exact exact same to your staying devices. BUT etch unit will need to have IP address that is unique .

instance:

When your House Router set:

ssid: house

password : 12345678

internet protocol address 192.168.100.1

submusk 255.255.255.0

you then should set product 1

1.work type: Sta

2.SSID: house

3.Encryption Disable : ( the system think it is automaticly )

4.Encryption key: 12345678

5.then click Save

6. Unchecked The Enable DHCP

7. set : internet protocol address: 192.168.100.10

8. set :submusk: 255.255.255.0

9. set Gateway Address 192.168.100.1

11. Head to system within the menu that is main and then click restart.

12. get the Orphek software and do search id, it must get the first device.

then you definitely should set unit 2 –

OBS: First turn OFF product 1 (therefore be no any internet protocol address conflict )

1.work type: Sta

2.SSID: home

3.Encryption Disable : ( the system believe it is automaticly )

4.Encryption key: 12345678

5.then click Save

https://besthookupwebsites.net/koreancupid-review/

6. Unchecked The Enable DHCP

7. set : internet protocol address: 192.168.100. 11

8. set :submusk: 255.255.255.0

9. set Gateway Address 192.168.100.1

11. Head to system when you look at the primary menu, and then click restart.

12. get the Orphek application and do search id, it will find device 2 .